利用臭氧氧化发光光谱特征检测水质污染     

侯广利  刘岩  蒋慧略  高杨  徐珊珊  尤小华 《海洋技术学报》2006,25(2):117-120

利用不同的污染物质在被臭氧氧化时发光特性不同的原理检测水质污染。检测出来的发光光谱与不同污染源的特征光谱进行对比,辅助发光时序等特征,检测几种污染物的含量和确定污染源。对涉及的有关技术问题进行了探讨。  相似文献   

对虾雄性交接器联合缘上小钩的研究     

童保福 《海洋科学》1991,15(3):31-35

本文通过扫描电镜的观察,研究了对虾科中5个属10种虾的雄性交接器联合缘上的小钩,对小钩的形态特征及小钩的机能进行了分析和描述。研究表明,小钩的研究将为对虾形态分类工作提供新的参考依据。  相似文献   

A New Approach to High-Order Boussinesq-Type Equations with Ambient Currents   总被引：6，自引：3，他引：6  

王亚玲张洪生  缪国平朱良生 《中国海洋工程》2005,19(1):49-60

A new approach to high-order Boussinesq-type equations with ambient currents is presented. The current velocity is assumed to be uniform over depth and of the same magnitude as the shallow water wave celerity. The wave velocity field is expressed in terms of the horizontal and vertical wave velocity components at an arbitrary water depth level. Linear operators are introduced to improve the accuracy of the kinematic condition at the sea bottom. The dynamic and kinematic conditions at the free surface are expressed in terms of wave velocity variables defined directly on the free surface. The new equations provide high accuracy of linear properties as well as nonlinear properties from shallow to deep water, and extend the applicable range of relative water depth in the case of opposing currents.  相似文献   

大窑湾海域水化要素分布及相关关系的探讨     

邵秘华  孙茜  贺广凯  张国光  刘彤 《海洋科学进展》1995,(2)

本文依据大窑湾的环境调查资料为基础，系统地阐述了水体中化学要素ｐＨ、盐度、透明度、ＤＯ、ＣＯＤ、ＴＯＣ、浊度、悬浮物、ＮＨ４－Ｎ、ＮＯ２－Ｎ、ＮＯ３－Ｎ、ＰＯ４－Ｐ、ＳｉＯ３－Ｓｉ、Ｃｕ、Ｐｂ、Ｚｎ、Ｃｄ、Ａｓ、Ｈｇ、Ｃｒ、硫化物、六六六、石油等分布规律。诸要素主要是在潮流水动力支配下，形成扩散带。各要素中仅有无机氮和ＰＯ４－Ｐ两项含量超标，其余要素含量范围都是处于海水正常浓度水平，属于一类海水水质。文章并对各要素进行相关关系分析。  相似文献   

以顾客为关注焦点,创中心品牌服务     

兰卉  姜华荣 《海洋技术学报》2006,25(2):129-131

IS09000标准八项质量管理原则的内容是：以顾客为关注焦点；领导作用，全员参与；过程方法；管理的系统方法；持续改进；基于事实的决策方法，与供方互利的关系。其中“以顾客为关注焦点”放在了质量管理八大原则的首位，并且贯穿于标准的始终。标准对这一原则所作的描述是“组织依存于顾客，因此组织应理解顾客当前和未来的需求，满足顾客要求并争取超越顾客期望”。  相似文献   

用臭氧处理海水对鱼虾的急性毒性效应研究   总被引：9，自引：2，他引：9  

姜国良  刘云  杨栋  吕艳 《海洋科学》2001,25(3):11-13

本实验检测了不同浓度臭氧残留对中国对虾(Penaeus chinensis)、牙鲆（Paralichthys oilvaceus）存活率的影响。结果表明，对虾的耐受力要比牙鲆鱼强，中国对虾在臭氧浓度≥1.0mg/L时，可存活至少48h，而芽鲆在此浓度下3h后，即出现鳃部充血肿胀、呼吸频率加快等不适应现象，48h LC50为0.13mg/L。如果能正确控制臭氧的残留量，利用臭氧净化养殖用水是一个不容质疑的水质净化的好方法。  相似文献   

海带雌性原生质体的分离与培养     

秦松  王希华  童顺  曾呈奎 《海洋与湖沼》1995,26(S1):126-129

于1993年1月 - 1993年4月，为了制备遗传性纯一的基因工程受体，用酶法从海带雌配子体单性生殖系分离雌性单倍体原生质体。从皱纹盘鲍消化腺及消化器官提取出鲍酶，在25°C下、1％（W／V）的鲍酶与2％（W／V）的纤维素酶（Onozuka R－10）合用能有效解离单细胞和原生质体。海带雌性原生质体经2d培养再生了细胞壁。  相似文献   

Static Analysis of Collision Strength of Offshore Platform     

Li Runpei Chen Weigang Gu Yongning Professor  Shanghai Jiao Tong University  Shanghai Assistant  Shanghai Jiao Tong University  Shanghai 《中国海洋工程》1996,(1)

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.  相似文献   

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel     

Tan Jiahua  Ma Wei  Pan Bin Associate Professor  Shanghai Jiao Tong University  Shanghai Lecturer  shanghai Jiao Tong University  Shanghai 《中国海洋工程》1992,(1)

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献